文件操作 - stratix10-smc.h
返回文件管理
返回主菜单
删除本文件
文件: /usr/src/linux-headers-5.15.0-186/include/linux/firmware/intel/stratix10-smc.h
编辑文件内容
/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2017-2018, Intel Corporation */ #ifndef __STRATIX10_SMC_H #define __STRATIX10_SMC_H #include <linux/arm-smccc.h> #include <linux/bitops.h> /** * This file defines the Secure Monitor Call (SMC) message protocol used for * service layer driver in normal world (EL1) to communicate with secure * monitor software in Secure Monitor Exception Level 3 (EL3). * * This file is shared with secure firmware (FW) which is out of kernel tree. * * An ARM SMC instruction takes a function identifier and up to 6 64-bit * register values as arguments, and can return up to 4 64-bit register * value. The operation of the secure monitor is determined by the parameter * values passed in through registers. * * EL1 and EL3 communicates pointer as physical address rather than the * virtual address. * * Functions specified by ARM SMC Calling convention: * * FAST call executes atomic operations, returns when the requested operation * has completed. * STD call starts a operation which can be preempted by a non-secure * interrupt. The call can return before the requested operation has * completed. * * a0..a7 is used as register names in the descriptions below, on arm32 * that translates to r0..r7 and on arm64 to w0..w7. */ /** * @func_num: function ID */ #define INTEL_SIP_SMC_STD_CALL_VAL(func_num) \ ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_64, \ ARM_SMCCC_OWNER_SIP, (func_num)) #define INTEL_SIP_SMC_FAST_CALL_VAL(func_num) \ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \ ARM_SMCCC_OWNER_SIP, (func_num)) /** * Return values in INTEL_SIP_SMC_* call * * INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION: * Secure monitor software doesn't recognize the request. * * INTEL_SIP_SMC_STATUS_OK: * Secure monitor software accepts the service client's request. * * INTEL_SIP_SMC_STATUS_BUSY: * Secure monitor software is still processing service client's request. * * INTEL_SIP_SMC_STATUS_REJECTED: * Secure monitor software reject the service client's request. * * INTEL_SIP_SMC_STATUS_ERROR: * There is error during the process of service request. * * INTEL_SIP_SMC_RSU_ERROR: * There is error during the process of remote status update request. */ #define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF #define INTEL_SIP_SMC_STATUS_OK 0x0 #define INTEL_SIP_SMC_STATUS_BUSY 0x1 #define INTEL_SIP_SMC_STATUS_REJECTED 0x2 #define INTEL_SIP_SMC_STATUS_ERROR 0x4 #define INTEL_SIP_SMC_RSU_ERROR 0x7 /** * Request INTEL_SIP_SMC_FPGA_CONFIG_START * * Sync call used by service driver at EL1 to request the FPGA in EL3 to * be prepare to receive a new configuration. * * Call register usage: * a0: INTEL_SIP_SMC_FPGA_CONFIG_START. * a1: flag for full or partial configuration. 0 for full and 1 for partial * configuration. * a2-7: not used. * * Return status: * a0: INTEL_SIP_SMC_STATUS_OK, or INTEL_SIP_SMC_STATUS_ERROR. * a1-3: not used. */ #define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START 1 #define INTEL_SIP_SMC_FPGA_CONFIG_START \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START) /** * Request INTEL_SIP_SMC_FPGA_CONFIG_WRITE * * Async call used by service driver at EL1 to provide FPGA configuration data * to secure world. * * Call register usage: * a0: INTEL_SIP_SMC_FPGA_CONFIG_WRITE. * a1: 64bit physical address of the configuration data memory block * a2: Size of configuration data block. * a3-7: not used. * * Return status: * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY or * INTEL_SIP_SMC_STATUS_ERROR. * a1: 64bit physical address of 1st completed memory block if any completed * block, otherwise zero value. * a2: 64bit physical address of 2nd completed memory block if any completed * block, otherwise zero value. * a3: 64bit physical address of 3rd completed memory block if any completed * block, otherwise zero value. */ #define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE 2 #define INTEL_SIP_SMC_FPGA_CONFIG_WRITE \ INTEL_SIP_SMC_STD_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE) /** * Request INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE * * Sync call used by service driver at EL1 to track the completed write * transactions. This request is called after INTEL_SIP_SMC_FPGA_CONFIG_WRITE * call returns INTEL_SIP_SMC_STATUS_BUSY. * * Call register usage: * a0: INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE. * a1-7: not used. * * Return status: * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_BUSY or * INTEL_SIP_SMC_STATUS_ERROR. * a1: 64bit physical address of 1st completed memory block. * a2: 64bit physical address of 2nd completed memory block if * any completed block, otherwise zero value. * a3: 64bit physical address of 3rd completed memory block if * any completed block, otherwise zero value. */ #define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE 3 #define INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE) /** * Request INTEL_SIP_SMC_FPGA_CONFIG_ISDONE * * Sync call used by service driver at EL1 to inform secure world that all * data are sent, to check whether or not the secure world had completed * the FPGA configuration process. * * Call register usage: * a0: INTEL_SIP_SMC_FPGA_CONFIG_ISDONE. * a1-7: not used. * * Return status: * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY or * INTEL_SIP_SMC_STATUS_ERROR. * a1-3: not used. */ #define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE 4 #define INTEL_SIP_SMC_FPGA_CONFIG_ISDONE \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE) /** * Request INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM * * Sync call used by service driver at EL1 to query the physical address of * memory block reserved by secure monitor software. * * Call register usage: * a0:INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM. * a1-7: not used. * * Return status: * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR. * a1: start of physical address of reserved memory block. * a2: size of reserved memory block. * a3: not used. */ #define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM 5 #define INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM) /** * Request INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK * * For SMC loop-back mode only, used for internal integration, debugging * or troubleshooting. * * Call register usage: * a0: INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK. * a1-7: not used. * * Return status: * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR. * a1-3: not used. */ #define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK 6 #define INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK) /** * Request INTEL_SIP_SMC_REG_READ * * Read a protected register at EL3 * * Call register usage: * a0: INTEL_SIP_SMC_REG_READ. * a1: register address. * a2-7: not used. * * Return status: * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR. * a1: value in the register * a2-3: not used. */ #define INTEL_SIP_SMC_FUNCID_REG_READ 7 #define INTEL_SIP_SMC_REG_READ \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_READ) /** * Request INTEL_SIP_SMC_REG_WRITE * * Write a protected register at EL3 * * Call register usage: * a0: INTEL_SIP_SMC_REG_WRITE. * a1: register address * a2: value to program into register. * a3-7: not used. * * Return status: * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR. * a1-3: not used. */ #define INTEL_SIP_SMC_FUNCID_REG_WRITE 8 #define INTEL_SIP_SMC_REG_WRITE \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_WRITE) /** * Request INTEL_SIP_SMC_FUNCID_REG_UPDATE * * Update one or more bits in a protected register at EL3 using a * read-modify-write operation. * * Call register usage: * a0: INTEL_SIP_SMC_REG_UPDATE. * a1: register address * a2: write Mask. * a3: value to write. * a4-7: not used. * * Return status: * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR. * a1-3: Not used. */ #define INTEL_SIP_SMC_FUNCID_REG_UPDATE 9 #define INTEL_SIP_SMC_REG_UPDATE \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_UPDATE) /** * Request INTEL_SIP_SMC_RSU_STATUS * * Request remote status update boot log, call is synchronous. * * Call register usage: * a0 INTEL_SIP_SMC_RSU_STATUS * a1-7 not used * * Return status * a0: Current Image * a1: Last Failing Image * a2: Version | State * a3: Error details | Error location * * Or * * a0: INTEL_SIP_SMC_RSU_ERROR */ #define INTEL_SIP_SMC_FUNCID_RSU_STATUS 11 #define INTEL_SIP_SMC_RSU_STATUS \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_STATUS) /** * Request INTEL_SIP_SMC_RSU_UPDATE * * Request to set the offset of the bitstream to boot after reboot, call * is synchronous. * * Call register usage: * a0 INTEL_SIP_SMC_RSU_UPDATE * a1 64bit physical address of the configuration data memory in flash * a2-7 not used * * Return status * a0 INTEL_SIP_SMC_STATUS_OK */ #define INTEL_SIP_SMC_FUNCID_RSU_UPDATE 12 #define INTEL_SIP_SMC_RSU_UPDATE \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_UPDATE) /** * Request INTEL_SIP_SMC_ECC_DBE * * Sync call used by service driver at EL1 to alert EL3 that a Double * Bit ECC error has occurred. * * Call register usage: * a0 INTEL_SIP_SMC_ECC_DBE * a1 SysManager Double Bit Error value * a2-7 not used * * Return status * a0 INTEL_SIP_SMC_STATUS_OK */ #define INTEL_SIP_SMC_FUNCID_ECC_DBE 13 #define INTEL_SIP_SMC_ECC_DBE \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_ECC_DBE) #endif /** * Request INTEL_SIP_SMC_RSU_NOTIFY * * Sync call used by service driver at EL1 to report hard processor * system execution stage to firmware * * Call register usage: * a0 INTEL_SIP_SMC_RSU_NOTIFY * a1 32bit value representing hard processor system execution stage * a2-7 not used * * Return status * a0 INTEL_SIP_SMC_STATUS_OK */ #define INTEL_SIP_SMC_FUNCID_RSU_NOTIFY 14 #define INTEL_SIP_SMC_RSU_NOTIFY \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_NOTIFY) /** * Request INTEL_SIP_SMC_RSU_RETRY_COUNTER * * Sync call used by service driver at EL1 to query RSU retry counter * * Call register usage: * a0 INTEL_SIP_SMC_RSU_RETRY_COUNTER * a1-7 not used * * Return status * a0 INTEL_SIP_SMC_STATUS_OK * a1 the retry counter * * Or * * a0 INTEL_SIP_SMC_RSU_ERROR */ #define INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER 15 #define INTEL_SIP_SMC_RSU_RETRY_COUNTER \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER) /** * Request INTEL_SIP_SMC_RSU_DCMF_VERSION * * Sync call used by service driver at EL1 to query DCMF (Decision * Configuration Management Firmware) version from FW * * Call register usage: * a0 INTEL_SIP_SMC_RSU_DCMF_VERSION * a1-7 not used * * Return status * a0 INTEL_SIP_SMC_STATUS_OK * a1 dcmf1 | dcmf0 * a2 dcmf3 | dcmf2 * * Or * * a0 INTEL_SIP_SMC_RSU_ERROR */ #define INTEL_SIP_SMC_FUNCID_RSU_DCMF_VERSION 16 #define INTEL_SIP_SMC_RSU_DCMF_VERSION \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_DCMF_VERSION) /** * Request INTEL_SIP_SMC_RSU_MAX_RETRY * * Sync call used by service driver at EL1 to query max retry value from FW * * Call register usage: * a0 INTEL_SIP_SMC_RSU_MAX_RETRY * a1-7 not used * * Return status * a0 INTEL_SIP_SMC_STATUS_OK * a1 max retry value * * Or * a0 INTEL_SIP_SMC_RSU_ERROR */ #define INTEL_SIP_SMC_FUNCID_RSU_MAX_RETRY 18 #define INTEL_SIP_SMC_RSU_MAX_RETRY \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_MAX_RETRY)
修改文件时间
将文件时间修改为当前时间的前一年
删除文件